Cottondale Slab Drawer Front (213)
Measurement Conversion Chart
Eighths
| 1/8 | 0.125 |
| 1/4 | 0.25 |
| 3/8 | 0.375 |
| 1/2 | 0.50 |
| 5/8 | 0.625 |
| 3/4 | 0.75 |
| 7/8 | 0.875 |
Sixteenths
| 1/16 | 0.0625 |
| 3/16 | 0.1875 |
| 5/16 | 0.3125 |
| 7/16 | 0.4375 |
| 9/16 | 0.5625 |
| 11/16 | 0.6875 |
| 13/16 | 0.8125 |
| 15/16 | 0.9375 |
Boring Options Available for the Cottondale Slab Drawer Front (213)
Most cabinet doors from CabinetDoorCenter can be purchased pre-bored for concealed or European style hinges.
We offer two styles of borings, cup only and cup and dowel. Cup only use press-in cups without any screws or dowels for fast installation. Cup and Dowel include two additional borings for dowels, for a stronger connection.
| HBP100 | HBP200 |
|---|---|
|
|
Either boring option can be set either 3mm or 5mm from the door edge. Arched doors may also have boring selected for either the left or right side. Square panel doors do not have a left or right option, they can be spun around to put the borings on the needed side.
| Boring Name | Boring Description |
|---|---|
| T | HBP100, 5mm (.196") from Edge |
| U | HBP100, 3mm (.118") from Edge |
| A | HBP200, 5mm (.196") from Edge |
| B | HBP200, 3mm (.118") from Edge |
Materials Available for the Cottondale Slab Drawer Front (213)
Outside Edge Options Available for the Cottondale Slab Drawer Front (213)
Paint Options Available for the Cottondale Slab Drawer Front (213)
Stain Options Available for the Cottondale Slab Drawer Front (213)
The Cottondale Drawer Front offers a deep scoop routing to simulate a raised panel, giving a warm curved feeling.
- Product Display Name: Cottondale Slab Drawer Front (213)
- Thickness: 3/4"
- Outside Edge Default: D17
- Joint Style: Slab
- Panel Shape: Slab
- Minimum Width: 8
- Maximum Width: 60
- Minimum Height: 8
- Maximum Height: 10